Acura NSX 1997 Service Manual page 814

Table of Contents

NOTE: Install the screw, attach the clip on each side,

and install the pillar and roof portions of the rear pillar

seal into the retainers about 50 mm (2 in).

Screw locations, 2

Table of Contents

13. Install each pillar portion of the rear pillar seal into

the rear pillar retainer as shown, then attach the clips.

• Do not press on the seal yet to make the adhe-

• After setting the lip at location

pillar seal while pushing the lip in the rear pillar

retainer with a rounded plastic spatula at location

(Pillar portion)

install the rear

Clip locations

Chapters

Table of Contents