Main Menu
Dashboard
Component Removal/Installation (cont'd)
SRS components are located in this area. Review the SRS component locations, precautions, and procedures in the SRS
(section
24) before performing repairs or service.
NOTE: Take care not to scratch the dashboard,
steering column and related parts.
CAUTION: When prying with a flat tip screw-
driver, wrap it with protective tape or a shop towel
to prevent damage.
Drivers:
RETRACTOR SWITCH/
DASH BRIGHTNESS
CONTROLLER
Disconnect the
connectors.
DASHBOARD LOWER
COVER (Driver's)
Installation is the reverse of the removal procedure.
NOTE: Make sure the connectors are connected properly.
Table of Contents
INSTRUMENT
PANEL
TCS SWITCH
Disconnect the connectors.
DASHBOARD
BRACE
DASHBOARD
LOWER PAD
INSTRUMENT
PANEL
CLIP
DASHBOARD
LOWER PAD