Acura NSX 1997 Service Manual page 824

Main Menu Main Menu
Opener/Latch/Opener cable/Hook stop/Roof stop
bracket removal:
1. Open the engine cover. Remove the screws, then
remove the support rod bracket. Remove the push
nuts, then remove the engine cover insulator.
Screw locations, 2
ENGINE
COVER
SUPPORT ROD
BRACKET
Table of Contents Table of Contents
Push nut locations, 19
ENGINE COVER
INSULATOR
2. Remove the roof cover latch, roof cover opener and
roof cover opener cable from the engine cover.
NOTE: Take care not to bend the roof cover opener
cable.
Nut locations, 5
ROOF COVER
OPENER CABLE
ROOF COVER
OPENER
ROOF COVER
LATCH
ROOF COVER
OPENER
Screw locations, 2
ROOF COVER
LATCH
ENGINE COVER
SHIMS
Thickness: 1.0 mm
(0.039 in)
ROOF COVER
OPENER CABLE
KNOB
ROOF COVER
OPENER CABLE