Retractor Switch Removal - Acura NSX 1997 Service Manual

Main Menu
Lighting System

Retractor Switch Removal

SRS components are located in this area. Review the SRS
component locations, precautions, and procedures in the
SRS section 24 before performing repairs or service.
1. Remove the dashboard lower cover, and disconnect
the connectors.
2. Remove the dashboard lower pad.
DASHBOARD LOWER
COVER
3. Remove the tilt cover.
Table of Contents
DASHBOARD
LOWER
PAD
TILT COVER
4. Remove the steering column covers.
UPPER COVER
LOWER COVER
5. Disconnect the 5P and 10P connectors from each
switch.
RETRACTOR SWITCH
10P CONNECTOR
6. Remove the six screws, then remove the instrument
panel trim from the dashboard.
RETRACTOR SWITCH
7. Remove the two screws, then remove the retractor
switch from the instrument panel trim.
TCS SWITCH
5P CONNECTOR
INSTRUMENT PANEL TRIM