Acura NSX 1997 Service Manual page 917

Main Menu
Ignition System
Ignition Coils/Spark Plugs Removal
CAUTION:
Ignition coils and spark plugs can become very hot in
use; do not touch them until the engine has cooled
down.
1. Remove the ignition coil covers.
2. Disconnect the 3P connectors from the ignition
coils.
3. Remove the ignition coils.
4. Remove the spark plugs.
IGNITION COIL COVER
IGNITION COIL
Table of Contents
CYLINDER HEAD
COVER
NOTE: Different ignition coils and ignition coil
covers are used for the front and rear cylinders. Be
sure to use the correct ones when mounting them.
3P CONNECTOR
RUBBER
SEAL
PLATINUM TIP SPARK PLUG