Acura NSX 1997 Service Manual page 758

Table of Contents

After inserting the screwdriver, turn it 90°.

Insert the tip the screwdriver in under the hook by

pivoting it. Detach the hook by prying it.

Table of Contents

8. Pull the center air vent backward while prying the

CAUTION: Use a shop towel on the dashboard to

prevent damage.

9. Detach the other hook in the same manner, then

remove the center air vent.

10. Install the center air vent and clock.

• If there is a minor dent on the dashboard, repair

it by hand as shown.

Make sure the connector of the clock is con-

nected properly.

FLAT TIP SCREWDRIVER

Chapters

Table of Contents