Motor Test - Acura NSX 1997 Service Manual

Main Menu

Motor Test

CAUTION: Be careful not to damage the seats, the
interior trim or the body.
1. Remove the power seat, then disconnect the 2P con-
nector from the slide motor.
2. Remove the two screws, then remove the power seat
switch from the power seat.
3. Disconnect the 5P connector from the power seat
switch (recline switch side).
SLIDE
MOTOR
2P CONNECTOR
Table of Contents
View from
wire side
RECLINE
MOTOR
5P CONNECTOR
View from
wire side
4. Test motor operation.
CAUTION: When the motor stops running, discon-
nect power immediately.
FORWARD
SLIDE: Connect battery power to the No. 6
terminal and ground to the No. 7
terminal.
BACKWARD
SLIDE: Connect battery power to the No. 7
terminal and ground to the No. 6
terminal.
FORWARD
RECLINE: Connect battery power to the No. 4
terminal and ground to the No. 1
terminal.
BACKWARD
RECLINE: Connect battery power to the No. 1
terminal and ground to the No. 4
terminal.
NOTE: If a motor does not run, reverse the power
and ground connections. If the motor still does not
run, the motor or the wire harness is faulty.