Acura NSX 1997 Service Manual page 1147

Main Menu
6. Disconnect the connector between the cable reel
and SRS main harness.
7. Remove the driver's airbag assembly from the
steering wheel, then remove the steering wheel
nut.
STEERING WHEEL NUT
TORX BOLT
Use a Torx T30 bit
8. Disconnect the connectors from the horn and
cruise control set/resume switches, then remove
the cable reel 3P connector from its clips.
CRUISE CONTROL
SET/RESUME SWITCH
CONNECTOR
HORN
CONNECTOR
CABLE REEL
3P CONNECTOR
Table of Contents
DRIVER'S
AIRBAG ASSEMBLY
9. Remove the steering wheel from the column.
10. Remove the cable reel and cancel sleeve.
CANCEL SLEEVE
CABLE REEL