Acura NSX 1997 Service Manual page 625

Main Menu
6. Install the new self-locking nuts on the top of the
damper assembly.
STRUT BRACE SELF-LOCKING NUT 10 x 1.25 mm
Replace.
53 N-m (5.4 kgf-m, 39 Ibf-ft)
7. Tighten the damper mounting nut to the specified
torque.
8. Secure the damper assembly to the frame with the
self-locking nuts.
9. Install the strut brace (NSX-T model only).
10. Install the rear hatch glass trim.
TAPPING SCREW
11. Install the engine cover support rod onto the strut
brace.
12. Install the rear wheels.
Table of Contents
Corrosion resistant bolt/nut
REAR HATCH GLASS