Cable Reel Removal - Acura NSX 1997 Service Manual

Table of Contents

Advertisement

Main Menu
Supplemental Restraint System (SRS)

Cable Reel Removal

Store a removed airbag assembly with the
pad surface up. If the airbag is improperly stored face
down, accidental deployment could propel the unit with
enough force to cause serious injury.
CAUTION:
Carefully inspect the airbag assembly before install-
ing it. Do not install an airbag assembly that shows
signs of being dropped or improperly handled, such
as dents, cracks or deformation.
Always keep the short connectors (RED) on the air-
bags when the harness is disconnected.
Do not disassemble or tamper with the airbag
assembly.
1.
Disconnect the battery negative cable and then the
positive cable.
2.
Before disconnecting any part of the SRS wire
harness, install the short connectors (RED) (see page
24-10).
3.
Make sure the wheels are aligned straight ahead.
Table of Contents
LOWER
COLUMN COVER
4.
Remove the dashboard lower cover, then discon-
nect the foot light connector and lights-on chime
connector from the dashboard lower cover.
FOOT LIGHT
CHIME
5.
Remove the column covers.
UPPER COLUMN COVER
DASHBOARD
LOWER COVER

Advertisement

Table of Contents
loading

Table of Contents