Trunk Latch Switch Test; Door Switch Test - Acura NSX 1997 Service Manual

Table of Contents

Advertisement

Main Menu

Trunk Latch Switch Test

1.
Open the trunk lid, and remove the trunk rear trim
panel.
2.
Disconnect the 3P connector from the trunk latch.
LOCK ROD
3P CONNECTOR
3.
Check continuity at the trunk latch connector termi-
nals.
There should be continuity between the B and C
terminals with the trunk lid open.
There should be no continuity between the B and
C terminals with the trunk latch in LOCK (trunk
lid closed) position.
Table of Contents
TRUNK LATCH
TRUNK OPENER
CABLE
View from
wire side
Push down with
screwdriver to lock
the latch.

Door Switch Test

1.
Remove the door panel (see
2.
Disconnect the 2P connector from the door lock
actuator assembly.
DOOR LOCK ACTUATOR
ASSEMBLY
(Has built-in door switch)
DOOR SWITCH (Microswitch type)
3.
Check continuity at the door switch connector ter-
minals.
There should be continuity between the A termi-
nal and B terminal with the door open.
There should be no continuity between the A
and B terminals with the switch pushed (door
closed).
section
20).
View from
terminal side
2P CONNECTOR

Advertisement

Table of Contents
loading

Table of Contents