Main Menu
Supplemental Restraint System (SRS)
Short Connector Installation
• If you ever remove the under-dash fuse box or the
SRS main harness, disconnect the SRS connector
at the fuse box:
CAUTION: Avoid breaking the connector; it's
double-locked.
First lift the connector lid with a thin screwdriver, then
press the connector tab down and pull the connector
out.
LID
SRS FUSE
To reinstall the connector, push it into position until it
clicks, then close its lid.
Table of Contents
TAB
UNDER-
DASH
FUSE BOX
SRS MAIN
HARNESS