Acura NSX 1997 Service Manual page 308

Main Menu
Reverse Shift Arm, Reverse Shift Fork
Clearance Inspection
1. Measure the clearance between the reverse shift
arm and the reverse shift piece.
2. If the clearance exceeds the service limit, measure
the width of the groove in the reverse shift arm.
If the width of the groove exceeds the standard,
replace the reverse shift arm with a new one.
If the width of the groove is within the standard,
replace the reverse shift piece with a new one.
Table of Contents
3. Measure the clearance between the reverse shift
arm and reverse shift fork.
4. If the clearance exceeds the service limit, measure
the width of the reverse shift arm.
If the width is less than the standard, replace the
reverse shift arm with a new one.
If the width is within the standard, replace the
reverse shift fork with a new one.