Acura NSX 1997 Service Manual page 1061

Hide thumbs

Table of Contents

Test condition

Under all conditions

Under all conditions

Driver's door lock

switch in LOCK

Driver's door lock

switch in UNLOCK

Passenger's door lock

switch in LOCK

Passenger's door lock

switch in UNLOCK

Driver's door lock knob

Driver's door lock knob

Passenger's door lock

key cylinder switch in

Passenger's door lock

key cylinder switch in

Driver's door open

Passenger's door open

Ignition key is inserted

into the ignition switch.

Connect the ORN termi-

nal to the WHT/RED ter-

minal, and the YEL/RED

terminal to the BLK ter-

minal momentarily.

Connect the ORN termi-

nal to the YEL/RED ter-

minal, and the

WHT/RED terminal to

the BLK terminal

momentarily.

CAUTION: To prevent damage to the motor, connect power and ground only momentarily.

Table of Contents

Test: Desired result

Check for continuity to ground:

There should be continuity.

Check for voltage to ground:

There should be battery voltage.

Check for voltage to ground:

There should be 1 V or less.

Check for voltage to ground:

There should be 1 V or less.

Check for voltage to ground:

There should be 1 V or less.

Check for voltage to ground:

There should be 1 V or less.

Check for voltage to ground:

There should be 1 V or less.

Check for voltage to ground:

There should be 1 V or less.

Check door lock operation:

Both doors should lock as power

and ground are connected momen-

Check door lock operation:

Both doors should unlock as power

and ground are connected momen-

Possible cause if result is not obtained