Acura NSX 1997 Service Manual page 1513

Main Menu
Security Alarm System
Control Unit Input Test
Remove the glove box, and disconnect the 22P connec-
tor and 16P connector from the control unit.
Inspect the connector and socket terminals to be sure
they are all making good contact.
• If the terminals are bent, loose, or corroded, repair
them as necessary, and recheck the system.
• If the terminals look OK, make the following input
tests at the connector.
— If any test indicates a problem, find and correct the
cause, then recheck the system.
— If all the input tests prove OK, the control unit must
be faulty; replace it.
• Different wires with the same color have been given a
number suffix to distinguish them (for example,
1
YEL/GRN and YEL/GRN
Table of Contents
2
are not the same).