Acura NSX 1997 Service Manual page 1407

Main Menu
Front Bumper
Replacement
NOTE:
• An assistant is helpful when removing and installing the front bumper.
• Take care not to scratch the front bumper and body.
1. Remove the bumper mounting bolts on each side, and lower skirt mounting bolts.
2. Lower the inner fender, then remove the bumper mounting nuts and the skirt mounting bolts from inside the front
fender on each side.
3. Lift and remove the front bumper.
4. Installation is the reverse of the removal procedure.
NOTE:
• Insert the bumper bracket hooks into the bumper bracket holes.
• Make sure the horn connector, washer motor connector, and ambient sensor connector are plugged in properly, and
the washer hose is connected properly.
Table of Contents