Acura NSX 1997 Service Manual page 1494

Table of Contents

Tighten the new PCV collar locknut to 39.2 N-m

(4.0 kgf-m, 29 Ibf-ft), then stake the PCV collar lock-

nut tab (A) into the PCV collar groove (B) using a

NOTE: Be careful not to break the PCV collar lock-

10. Apply liquid gasket, P/N 08718-0009, evenly by

width of 4 mm to the rear cylinder head cover,

along the broken line (A).

NOTE: Do not install the parts if 5 minutes or more

have elapsed since applying liquid gasket. Instead,

reapply liquid gasket after removing the old

Table of Contents

11. Install the breather cover (A), then tighten the bolts

(B) to 9.8 N-m (1.0 kgf-m, 7.2 Ibf-ft).

12. Install the rear cylinder head cover, refer to the 1997

NSX Service Manual, P/N 61SL006 (see step 16 on

13. Install the PCV valve (see page 11-52).

Chapters

Table of Contents