Acura NSX 1997 Service Manual page 1524

Main Menu
Lubrication Points
For the details of lubrication points and types of lubricants to be applied, refer to the illustrated index and various work
procedures (such as Assembly/Reassembly, Replacement, Overhaul, Installation, etc.) contained in each section.
No.
1 Engine
2 Transmission
3 Brake system (including anti-lock brake system)
4 Clutch line
5 Change lever pivots (M/T)
6 Release fork (M/T)
7 Steering gearbox
8 Steering boots
9 Steering ball joints
10 Select lever (A/T)
11 Pedal linkage
12 Intermediate shaft
13 Brake master power pushrod
14 Fuel fill door
15 Clutch master cylinder pushrod
16 Tilt lever
17 Parking brake cable end
18 Door hinges upper and lower
19 Door opening detents
20 Hood hinges and lock
21 Rear hatch latch
22 Shift cable end and select cable end (A/T)
23 Throttle cable ends
24 Caliper piston boot,
caliper pins, and boots
25 Air conditioning compressor
API CERTIFICATION SEAL
*1: Always use Honda Manual Transmission Fluid (MTF). Using motor oil can cause stiffer shifting because it does not contain the
proper additives.
*2: Always use Honda ATF-Z1 (ATF). Using a non-Honda ATF can affect shift quality.
*3: Always use Honda Heavy Duty DOT3 Brake Fluid. Using a non-Honda brake fluid can cause corrosion and decrease the life of
the system.
4-2
Table of Contents
LUBRICATION POINTS
Manual
Automatic
LUBRICANT
Honda Motor Oil: P/N 08798-9015.
Look for the API Certification seal shown below. Make sure
it says "For Gasoline Engines."
Honda MTF* 1 (P/N 08798-9016)
Honda ATF-Z1 (ATF)* 2 (P/N 08200-9001)
Honda Heavy Duty DOT3 Brake Fluid*
Super High Temp Urea Grease (P/N 08798-9002)
Steering grease (P/N 08733-B070E)
Multipurpose grease
Silicone grease
Honda Caliper Grease (P/N 08C30-B0234M)
Compressor oil:
DENSO: ND-OIL8 (P/N 38897-PR7-A01AH or 38899-PR7-A01)
For Refrigerant: HFC-134a (R-134a)
Recommended engine oil
Engine oil viscosity for
ambient temperature ranges
3
(P/N 08798-9008)