Connecting The Programming Pendant - YASKAWA DX100 Instructions Manual

DX100

4.3.3 Connecting the Programming Pendant

工控帮助教小舒QQ:2823408167
4 Connection
4.3 Connection Methods
Always close the door of the controller (DX100) except for mainte-
nance.
Make sure to rotate all the door locks counterclockwise.
If dust or water enter inside the controller, electric shock or breakdown
of DX100 may result.
1. Connect the programming pendant cable to the connector on the door
lower right side of the controller cabinet.
Fig. 4-17: Connecting the Programming Pendant
– The manipulator, DX100, and the programming pendant
connections are now complete.
4-12
CAUTION
Alignment mark