DX100
8.15
8.15.1 What is the Numeric Key Customize Function?
8.15.2 Allocatable Functions
8.15.2.1 Key Allocation (EACH)
工控帮助教小舒QQ:2823408167
8
System Setup
8.15 Numeric Key Customize Function
Numeric Key Customize Function
With this function, the user can set the function of an application that has
been allocated to the numeric keys of the programming pendant to the
other function.
Since any frequently used operation can be allocated to the numeric keys
on the programming pendant, decreased key operations reduce the
teaching time.
The Numeric Key Customize Function is allowed to set only
NOTE
when the security mode is in the management mode.
There are two allocation methods as follows:
• Key Allocation (EACH)
• Key Allocation (SIM)
With key allocation (EACH), the manipulator operates according to the
allocated function when the numeric key is pressed. The allocatable
functions are listed below.
Function
Description
Manufacturer
Allocated by Yaskawa. Allocating another function
invalidates the function allocated by the manufacturer.
allocation
Instruction
Allocates any instructions assigned by the user.
allocation
Job call allocation
Allocates job call instructions (CALL instructions). The
jobs to be called are only those registered in the reserved
job names. (Specified by the registration No.)
Display allocation
Allocates any displays assigned by the user.
8-100