DX100
3
Installation
3.1
3.1.1 Using a Crane to Move the Controller
工控帮助教小舒QQ:2823408167
3
Installation
3.1
Handling Procedure
Handling Procedure
•
Crane, sling, and forklift operations must be performed only by
authorized personnel.
Failure to observe this caution may result in injury or damage.
•
Avoid jarring, dropping, or hitting the controller during handling.
Excessive vibration or impacting the DX100 may adversely affect the
performance of the DX100.
Check the following before handling the DX100:
• Confirm the weight of the controller before handling, and use a wire
rope with a rating that is greater than the weight of the controller.
• Install eyebolts for handling and confirm they are securely fastened
before hoisting.
Wire Rope
M16 Eye Bolt
3-1
CAUTION
Table 3-1: Approx. Weight of DX100
Models Available for
Approx. Weight
DX100
(kg)
small capacity:
A-Type
MA1400, MA1900,
(standard)
VA1400, MH5, MH5L,
100
MH6, HP20D, HP20D-6
middle, large capacity:
A-Type
MH50, MS80, ES165D,
(standard)
ES200D, VS50, SIA50D
100