Modification Of System Configuration; Addition Of I/O Modules - YASKAWA DX100 Instructions Manual

DX100

11 Modification of System Configuration

11.1
工控帮助教小舒QQ:2823408167
11 Modification of System Configuration

11.1 Addition of I/O Modules

Addition of I/O Modules
To add I/O modules, turn OFF the power supply.
Addition operation must be performed in the management
mode.
SUPPLE
In the operation mode or editing mode, only reference of
-MENT
status setting is possible.
1. Turn ON the power supply again while pressing [MAIN MENU]
simultaneously.
2. Change the "SECURITY MODE" to the "MANAGEMENT MODE".
3. Select {SYSTEM} under the main menu.
– The system window appears.
4. Select {SETUP}.
– The SETUP window appears.
– The items marked with " " cannot be selected.
11-1