Job Call Allocation; Display Allocation - YASKAWA DX100 Instructions Manual

DX100

8.15.3.3 Job Call Allocation

8.15.3.4 Display Allocation

工控帮助教小舒QQ:2823408167
8 System Setup
8.15 Numeric Key Customize Function
Set this function in the KEY ALLOCATION (EACH) window.
1. Move the cursor to the "FUNCTION" of the key to be allocated and
press [SELECT].
– A selection list appears.
2. Select "JOB CALL".
– The reserved job registration No. is shown in the "ALLOCATION
CONTENT" (reserved job registration No.: 1 to 10).
(1) To change the reserved job registration No. move the cursor to the
No. and press [SELECT]. Then input buffer line appears.
(2) Input the number to be changed, and press [ENTER].
Set this function in the KEY ALLOCATION (EACH) window.
1. Move the cursor to the "FUNCTION" of the key to be allocated and
press [SELECT].
– Selection list appears.
2. Select [DISPLAY].
3. Move the cursor to "ALLOCATION CONTENT" and press [SELECT].
– Character input is available.
8-105