Basic Operation - Veichi AC100-T3-1R5G Manual

AC100 HIGH-PERFORMANCE VC INVERTER MANUAL

4.3 Basic Operation

Parameter Initialization
●
Set F0.19=1, and the parameter initialization is completed. Operation details as follows:
Control Mode Selection of Motor 1
●
Here we set F0.00=0（AM VC without PG）as an example to introduce.
Start-up Mode Selections
●
Three start-up modes: 0: direct start-up, 1: braking firstly, then start by start-up frequency, 2: speed track and
start-up. Here we set F1.00=2(speed track and start-up) as an example:
Motor Parameter Setting
●
Set［F5.02］(motor rated power),［F5.03］(motor rated frequency),［F5.04］(motor rated speed), ［F5.05］
(motor rated voltage) according to the motor nameplate. Other parameter setting can be obtained by inverter
self-study.
Please refer to the following operation mode chart:
Chart 4-2: Parameter Initialization
Chart 4-3: Control Mode Selection of Motor 1
Chart 4-4: Start-up Mode Selections
41
BASIC OPERATION AND TRIAL RUN