Veichi AC100-T3-1R5G Manual page 109

AC100 HIGH-PERFORMANCE VC INVERTER MANUAL
the analog voltage is less than 3V; hysteresis loop when 3V-7V; high electrical level when the analog current exceeds
14mA; low electrical level when the analog current is less than 6mA; hysteresis loop when 6mA -14mA, the input level
remains unchanged during hysteresis
F2.60 Analog terminal effective status setting
LED "0"digit: VS
LED"00"digit: AI
LED "000"digit: AS
0: low electrical level valid
1: high electrical level valid
F2.61-F2.64 Virtual vY1-vY4 output selection
Virtual terminals vY1 ~ vY4 output function selection with Y terminal and relay detailed description see [F2.29-F2.31].
F2.65-F2.68 Virtual vY1-vY4output delay time
Virtual terminals vY1 ~ vY4 output delay settings with Y terminals and relay detailed description see [F2.47-F2.49].
Virtual Terminal feature is the combination of vXi and vYi, setting Y terminal output signal as X terminal input signal can
be realized through internal vXi connecting with vYi virtual, thus saving the actual X and Y terminals.
control panel X terminal Y terminal
Y
Connecting by external X and Y terminal
The following example illustrates the application of virtual vX and vY:
Example 1: cases requires the inverter ready to run when the initialization is completed, under normal conditions an X
input terminal would be used; if using a virtual terminal, the real X terminal can be used for other inputs, as follows:
Set F0.02 = 1 Run command source terminal control;
Set F2.12 = 0 two-line control 1;
Set F2.51 = 1 terminal inputs forward run;
Set F2.55 = 0000 vX1 effective state is determined by vY1;
Set F2.61 = 8 output when inverter operation ready.
X
106
FUNCTION PARAMETER SPECIFICATION
Setting range：000-111
Setting range：0-28
Setting range：0.0-999.9s
control panel X terminal Y terminal
vY
Y
Connecting by virtual terminal internal connection
Factory default： 000
Factory default：0
Factory default：0
vX
X