Analog Terminal Parameter - Veichi AC100-T3-1R5G Manual

AC100 HIGH-PERFORMANCE VC INVERTER MANUAL
Terminal input extended (X8)
F2.69-F2.71 Terminal input extended (X9)
Terminal input extended (X10)
Expansion card terminals X8, X9, X10 function selection, please refer [F2.00-F2.06].
Tip: 1, [F2.69-F2.71] and [F2.00-F2.06] Function Select Settings mutual exclusive;
2, the expansion of the use of the terminal must be optional terminal expansion card EXIO1
F2.72 X8-X10input terminal filter time
F2.73 X8-X10 terminal feature selection
Same as [F2.08] and [F2.09]
F2.74 Output extended relay 3（TA3-TC3）
F2.75 Output extended relay4（TA4-TC4）
Extended relay output function selection, please refer [F2.29-F2.31], but there're only normal open contact points for T3,
T4.
Tip: [F2.74-F2.75] and [F2.29-F2.31] function select settings mutual exclusive.

8.4 Analog Terminal Parameter

F3.00 VS Lower limit
F3.01 VS Lower limit corresponding setting
F3.02 VS upper limit
F3.03 VS upper limit corresponding setting
F3.04 VS filter time
VS Lower limit: It defines signal accepted by analog input terminal (VS), Inverter deal voltage lower than this value as
lower limit.
VS lower limit corresponding setting: It defines ratio of VS lower limit.
VS upper limit: It defines signal accepted by analog input terminal (VS). Inverter deal voltage higher than this value as
higher limit.
VS upper limit corresponding setting: It defines ratio of VS upper limit.
VS filter time: It is (VS) input analog signal filter time to eliminate disturb signal. The longer filter time is, the stronger
anti-disturb force is. The shorter filter time is, the weaker anti-disturb force is. But respond speed will be quicker.
Setting range：0-47
Setting range：0.000 -60.000s
Setting range：000-111
See Y terminal function
Setting range: 0.00-10.00V
Setting range: 0.00-100.00%
Setting range: 0.00-10.00V
Setting range: 0.00-100.00%
Setting range: 0.00-10.00s
108
FUNCTION PARAMETER SPECIFICATION
Factory default：0
Factory default：0.010s
Factory default：0x000
Factory default：0
Factory default：0
Factory default 0.00V
Factory default 0.00%
Factory default 10.00V
Factory default 100.00%
Factory default 0.10s