Veichi AC100-T3-1R5G Manual page 196

AC100 HIGH-PERFORMANCE VC INVERTER MANUAL
F2 quantum digital terminal parameter
group
F3 quantum analog terminal parameter
group
F4 keyboard and display parameter group
F5 motor parameter group
F6 VC control parameter group
F7 torque control parameter
F8 V/F control parameter group
F9 reserved
FA malfunction protection parameter
group
Fb PID control parameter group
FC multi velocity and PLC parameter
group
Fd communication control parameter
group
FE reserved
FF reserved
C monitor parameter group
Communication control parameter group
Note: since it is inevitable that the parameters are frequently rewritten during the communication, the lifetime
of EEPROM would be shortened if frequently stored. As for the users, some functions are unnecessary to store
in the communication mode, only changing the value of RAM inner value can satisfy the required use. When
AC100 communication protocol stipulates to use writing command (06 H), if the parameter function code
address domain's highest digit is 0, it only write in the RAM of the frequency inverter, and power down without
storage; if the parameter function code address high half digit is 1, it write in EEPROM, which means power off
storage.
For instance, when rewriting the function parameter [F0.14], if not depositing to EEPROM, address expresses for
000EH; if depositing to EEPROM, address expresses for 100EH.
(2)Communication Control Parameter Group Address Specification:
Function Specification
Communication Given
0x1100（saved in to EEPROM）
0x0200（not saved in to EEPROM）
0x1200（saved in to EEPROM）
0x0300（not saved in to EEPROM）
0x1300（saved in to EEPROM）
0x0400（not saved in to EEPROM）
0x1400（saved in to EEPROM）
0x0500（not saved in to EEPROM）
0x1500（saved in to EEPROM）
0x0600（not saved in to EEPROM）
0x1600（saved in to EEPROM）
0x0700（not saved in to EEPROM）
0x1700（saved in to EEPROM）
0x0800（not saved in to EEPROM）
0x1800（saved in to EEPROM）
0x0900（not saved in to EEPROM）
0x1900（saved in to EEPROM）
0x0A00（not saved in to EEPROM）
0x1A00（saved in to EEPROM）
0x0B00（not saved in to EEPROM）
0x1B00（saved in to EEPROM）
0x0C00（not saved in to EEPROM）
0x1C00（saved in to EEPROM）
0x0D00（not saved in to EEPROM）
0x1D00（saved in to EEPROM）
0x0E00（not saved in to EEPROM）
0x1E00（saved in to EEPROM）
0x0F00（not saved in to EEPROM）
0x1F00（saved in to EEPROM）
0x2100
0x3000 or 0x2000
Address Definition
0x3000 or 0～32000 is corresponding to
Data Meaning Specification
193
Appendix
R/W
Characteristic
W/R