Veichi AC100-T3-1R5G Manual page 112

AC100 HIGH-PERFORMANCE VC INVERTER MANUAL
F3.05 AI Lower limit when used as VS
AI Lower limit corresponding
F3.06
setting
F3.07 AI upper limit when used as VS
AI upper limit corresponding
F3.08
setting
F3.09 AI filter time
F3.10 AS Lower limit
AS Lower limit corresponding
F3.11
setting
F3.12 AS upper limit
AS upper limit corresponding
F3.13
setting
F3.14 AS filter time
See VS explain. AI (VS) indicates setting when the AV terminal input voltage analog.
F3.15 AI lower limit when used as AS
LED "0"digit: VS
LED"00"digit: AI
LED "000"digit: AS
0: straight line By default, usually two points straight line, please refer to the above "given frequency analog
schematic
1: curve 1 Multi-point stitches, see function code [F3.32-F3.39] description
2: curve 2 Multi-point stitches, see function code [F3.40-F3.47] description
F3.16 AI(AS) Lower limit
AI(AS) Lower limit
F3.17
corresponding setting
F3.18 AI(AS) upper limit
AI(AS) upper limit
F3.19
corresponding setting
Settings are the same as [F3.10-F3.13], AI (VS) indicates setting when the AI terminal input current analog.
F3.20
F3.21 A0 output signal type
"0"digit: AO1
0：0-10V
1：4.00-20.00mA
2：0.00-20.00mA
"00"digit: AO2
0：0-10V
1：4.00-20.00mA
Setting range: 0.00-10.00V
Setting range: 0.00-100.00%
Setting range: 0.00-10.00V
Setting range: 0.00-100.00%
Setting range: 0.00-10.00s
Setting range: 0.00-20.00mA
Setting range: 0.00-100.00%
Setting range: 0.00-20.00mA
Setting range: 0.00-100.00%
Setting range: 0.00-10.00s
Setting range: 0.00-20.00mA
Setting range：0.00-20.00mA
Setting range：0.00-100.00%
Setting range：0.00-20.00mA
Setting range：0.00-100.00%
Reserved
Setting range：0x00-0x32
109
FUNCTION PARAMETER SPECIFICATION
Factory default: 0.00V
Factory default: 0.00%
Factory default: 10.00V
Factory default: 100.00%
Factory default: 0.10s
Factory default: 4.00mA
Factory default: 0.00%
Factory default :20.00mA
Factory default: 100.00%
Factory default: 0.10s
Factory default: 4.00mA
Factory default: 4.00mA
Factory default: 0.00%
Factory default: 20.00mA
Factory default: 100.00%
Factory default: 0000