AC100 HIGH-PERFORMANCE VC INVERTER MANUAL
asynchronous motors or synchronous motor torque control debugging procedure
●
Set start and stop command, using local keyboard to set frequency and
command channel related function code F0.02,F0.03,F0.09,F0.14,F0.15;
Set motor parameter F5.01-F5.06,F8.00, and set F5.15-F5.19 according
to encoder; set speed mode to debug F0.01=0
Speed mode pass or not ?
torque control debugging , set F0.01=1;
set torque command parameter:F7.00,F7.02;
torque control debugging
Debugging ends and set other parameters
according to the users' requirements
F0.00=0
F0.00=2
F0.00=7
Yes
Normal or not?
Yes
Chart 4-24 motor torque control debugging procedure
BASIC OPERATION AND TRIAL RUN
No
re-debug speed
control mode
No
cooperate with speed ring parameter
(F6.00-F6.09), current ring parameter
(F6.16-F6.19) adjustment
54