Appendix 3: Pg Card Manual - Veichi AC100-T3-1R5G Manual

AC100 HIGH-PERFORMANCE VC INVERTER MANUAL

9.3 Appendix 3: PG Card Manual

1. Overview
AC100 is equipped with various feedback cards that are mainly used for VC frequency inverter (AC100 series)
feedback of motor speed and direction detection signal to achieve higher accuracy of motor speed and direction control.
Please select the corresponding PG card according to the encoder.
2. Types and Selections of PG Card
There're 2 types of PG card: incremental encoder PG card and rotary transformer PG card. Encoder input signal type
and feedback card output signal type are as follows;
Type
Incremental encoder
PG
Rotary transformer PG
3. Order Model
Order Model Instructions
Series name
PG01:AC100series
Input signal type
ABZ:input signal is ABZ
pulse ;
UVW:input signal is ABZ
/UVW pulse ;
RT:input signal is rotary
trasnformer signal
Order Information:
1) The power supply of domestic encoders are usually 5V or 12V, while foreign encoders are usually 5V, please select
the appropriate power supply based on the encoder type.
2) Resolution is the number of output pulses of the encoder per cycle, which must meet the designing precision
requirements. Please choose the right power supply based on encoder mode.
3) please choose the PG card output signal receiving device based on the actual demands, such as monitoring
equipment can be selected PLC OC output type, and differential output type can be chosen for other special
Support input signal type
1.Difference signal input
2.Open collector circuit
input
3.Push-pull signal input
Rotary transformer signal
input
PG01-ABZ-05-C1
Type of PG output signal;
1.Open collector circuit
input(frequency division / no
division)
2.Difference signal
output(frequency division / no
division）
None
Division frequency
1:invalid ；
2:valid ；
Output signal type:
C ： OC ；
D ： Difference output) ；
Power :
12:DC 12V
05:DC 5V
196
Appendix
Suitable motor type
AM
AM/PM