Remote Support; Remcs - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 2 System Status

2.3 Remote Support

2.3 Remote Support
This function displays the set state for the Remote Support function (REMCS or AIS Connect).
• When only REMCS is available, the [REMCS] screen appears. Refer to
• When only AIS Connect is available, the [AIS Connect] screen appears. Refer to
49) for details.
• When both REMCS and AIS Connect are available, setting information for REMCS and AIS Connect are dis-
played.
- Click [REMCS] in the category and display the [REMCS] screen to perform the REMCS actions. Refer to
"2.3.1 REMCS" (page 46)
- Click [AIS Connect] in the category and display the [AIS Connect] screen to perform the AIS Connect
actions. Refer to
2.3.1

REMCS

This function displays the Remote Support function settings and the operation status in the ETERNUS DX/AF.
REMCS and AIS Connect cannot be used at the same time. AIS Connect function can only be used when
REMCS is not specified or is stopped. When REMCS is used, suspend the REMCS function, and then enable the
AIS Connect function. Refer to "Stop/Restart Remote Support" in "ETERNUS Web GUI User's Guide (Settings)"
for details.
REMCS can be specified or restarted when the AIS Connect function is disabled. Refer to "Setup AIS Connect
Environment" in "ETERNUS Web GUI User's Guide (Settings)" for details.
for details.
"2.3.2 AIS Connect" (page 49)
46
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
"2.3.1 REMCS" (page 46)
for details.
for details.
"2.3.2 AIS Connect" (page
P2X0-1260-19ENZ0