Fujitsu ETERNUS DX60 S3 User Manual page 28

Disk storage systems, all-flash arrays
Hide thumbs Also See for ETERNUS DX60 S3:
Table of Contents

Advertisement

Chapter 1 Screen Operations
1.1 Overview
Total Capacity
The total capacity of the RAID groups [TB/GB/MB] is displayed. The "Total Capacity" is the total capacity of
all the RAID groups in the ETERNUS DX/AF. The "Total Capacity" includes the capacity of the RAID groups
that configure TPPs, the capacity of the RAID groups that configure FTRPs, the capacity of the RAID groups
that are registered as REC Disk Buffers, and the capacity of the RAID groups that are registered as EXCPs.
Total Free Capacity = Total Capacity - Total Used Capacity
Thin Provisioning Pool
The usage of TPP is displayed.
Pie chart
The pie chart indicates the total used physical capacity and the total free physical capacity in the TPPs.
Blue: Total used physical capacity
Gray: Total free physical capacity
Thin Provisioning Pool Count
The number of TPPs registered in the ETERNUS DX/AF is displayed.
Volume Count
The number of volumes registered in the ETERNUS DX/AF is displayed.
This value displays the number of "TPV" type volumes.
Total Used Physical Capacity
The total used physical capacity of the TPPs [PB/TB/GB/MB] is displayed. The "Total Used Physical Capacity"
is the total physical capacity of all the TPPs that are used for volumes.
Total Free Physical Capacity
The total free physical capacity of the TPPs [PB/TB/GB/MB] is displayed. The "Total Free Physical Capacity" is
the total unused physical capacity of all the TPPs.
Total Physical Capacity
The total physical capacity of the TPPs [PB/TB/GB/MB] is displayed. The "Total Physical Capacity" is the total
physical capacity of all the TPPs in the ETERNUS DX/AF.
Total Free Physical Capacity = Total Physical Capacity - Total Used Physical Capacity
Maximum Pool Capacity
The maximum pool capacity is displayed.
The maximum pool capacity is the maximum total capacity for TPPs and FTRPs that can be created in the
ETERNUS DX/AF.
The "Maximum Pool Capacity" is specified by using the [Set Thin Provisioning] function. Refer to "Set Thin
Provisioning" in "ETERNUS Web GUI User's Guide (Settings)" for details.
28
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
P2X0-1260-19ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents