Chapter 4 Volume Status
4.3 Performance (QoS)
The volume name is displayed.
Click this item to display the [Volume Detail] screen. Refer to
The volume type is displayed.
The usage of the volume is displayed.
The volumes that are used for the SAN.
The Deduplication/Compression Volumes.
The volumes that are used for the NAS.
IOPS, the total number of reads and writes per second, is displayed.
Throughput, the total amount of read data and write data transferred per second, is displayed.
The bandwidth limit for the volume is displayed.
If the bandwidth limit has not been configured for the volume, the default value ("Unlimited") is displayed.
Input the volume name that is to be displayed.
When not using the volume name for filtering, leave this item blank.
Select the volume type that is to be displayed.
"TPV" and "FTV" are displayed as options only when the Thin Provisioning function is
Select the usage of the volume that is to be displayed.
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
"4.11 Volume Detail (Basic)" (page 223)