Meta Cache Distribution - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 5 Connectivity Status
5.8 NAS
Filter setting
Filter
Volume Name
Name
Used Status
Drive Used Size
Drive Used Rate
File Used Count
File Used Rate
5.8.4

Meta Cache Distribution

This function displays the setting state of the automatic meta cache distribution and the location of the meta
cache.
"Meta cache" is a cache area in NAS for storing the management information of the file system. If the meta
cache distribution is different from the initial location when the NAS volumes (NAS user volumes and the NAS
backup volumes) are created, the meta cache is concentrated in one controller. In this case, the CM memory
where the meta cache exists may become insufficient or the access performance to the NAS volumes from the
CM without meta cache may be reduced.
This function is displayed in a Unified Storage environment.
• To distribute the meta cache, using the [Initialize Meta Cache Distribution] function is recommended.
• The meta cache distribution can be initialized manually. Refer to "Initialize Meta Cache Distribution" in
"ETERNUS Web GUI User's Guide (Settings)" for details.
• The meta cache distribution can be initialized automatically. Refer to "Enable Automatic Meta Cache
Distribution" in "ETERNUS Web GUI User's Guide (Settings)" for details.
• Automatic meta cache distribution can be disabled. Refer to "Disable Automatic Meta Cache Distribution"
in "ETERNUS Web GUI User's Guide (Settings)" for details.
Input the volume name that is to be displayed.
When not using the volume name for filtering, leave this item blank.
Input the user name, group name, or shared folder name of the quota target that is to
be displayed.
When not using the name for filtering, leave this item blank.
Select the used state that is to be displayed.
Input the used size of the drive that is to be displayed.
The quota setting information is displayed if the drive used size is larger than or equal to
the specified value.
When not using the drive used size for filtering, leave this item blank.
Input the used rate of the drive that is to be displayed.
The quota setting information is displayed if the drive used rate is larger than or equal to
the specified value.
When not using the drive used rate for filtering, leave this item blank.
Input the number of used files that is to be displayed.
The quota setting information is displayed if the number of used files is greater than or
equal to the specified value.
When not using the file used count for filtering, leave this item blank.
Input the used rate for the file that is to be displayed.
The quota setting information is displayed if the file used rate is larger than or equal to
the specified value.
When not using the file used rate for filtering, leave this item blank.
304
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
Description
P2X0-1260-19ENZ0