Fujitsu ETERNUS DX60 S3 User Manual page 119

Chapter 3 Component Status
3.6 Controller Enclosure Detail
■ Front View
The image that is displayed in this screen varies depending on the storage system model.
●
For the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS AF250, and the ETERNUS DX200F
The following items are displayed in the Main area:
- Storage system image
The front view of the CE that is installed in the ETERNUS DX/AF is displayed. The number of drives that
can be installed for each CE type is as follows:
• 2.5" CEs
24 drives (24 drives are lined up horizontally)
• 3.5" CEs
12 drives (3 drives are lined up vertically and 4 drives are lined up horizontally)
• When no drives are installed
Blank
The drive status is displayed with an icon. Refer to
By clicking the drive image, the [Drive Detail] screen is displayed. Refer to
164) for display items.
- Parts
The drive number is displayed. By clicking the drive number, the [Drive Detail] screen is displayed.
Refer to
- Status
The drive status is displayed. Refer to
- Capacity
The capacity of the drive is displayed.
The drive capacity that is displayed for the SSD-L differs from the product's actual capacity. For
example, the drive capacity of a "1.92TB SSD-L" is displayed as "2.00 TB".
"3.19 Drive Detail" (page 164)
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
"A.5 Component Status" (page 410)
for display items.
"A.5.1 Drive Status" (page 411)
119
for details.
"3.19 Drive Detail" (page
for details.
P2X0-1260-19ENZ0