Fujitsu ETERNUS DX60 S3 User Manual page 214

Chapter 4 Volume Status
4.7 Pinned Data
• Type
The volume type is displayed.
- Standard
- WSV
- TPV
- FTV
- SDV
- SDPV
- Temporary
• Usage
The usage of the volume is displayed.
- Block
The volumes that are used for the SAN.
- File
The volumes that are used for the NAS.
- System
The volumes that are used for management information.
Refer to
• RAID Group/TPP/FRTP No.
The following number is displayed:
- If the type is "WSV"
The RAID group number to which the representative volume (*1) belongs is displayed.
*1: A volume for WSV, which is created by concatenating multiple RAID groups with striping, that belongs to the
RAID group that is first in the concatenation order.
- If the type is "TPV"
The Thin Provisioning Pool (TPP) number to which the volume belongs is displayed.
- If the type is "FTV"
The Flexible Tier Pool (FTRP) number to which the volume belongs is displayed.
- If the type is not one of the types listed above
The RAID group number to which the volume belongs is displayed.
• RAID Group/TPP/FTRP Name
The following name is displayed:
- If the type is "WSV"
The RAID group name to which the representative volume belongs is displayed.
- If the type is "TPV"
The Thin Provisioning Pool (TPP) name to which the volume belongs is displayed.
- If the type is "FTV"
The Flexible Tier Pool (FTRP) name to which the volume belongs is displayed.
- If the type is not one of the types listed above
The RAID group name to which the volume belongs is displayed.
• Controlling CM
The Controlling CM of the RAID group to which the volume belongs is displayed.
"Usage Details" (page 228)
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
in "4.11 Volume Detail (Basic)" (page 223)
214
for details.
P2X0-1260-19ENZ0