Fujitsu ETERNUS DX60 S3 User Manual page 6

Preface
The Structures and Contents of ETERNUS Web GUI Manuals
The ETERNUS Web GUI manual is composed of the following three manuals.
• FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Web GUI)
• ETERNUS Web GUI User's Guide (Settings)
• ETERNUS Web GUI User's Guide (Operation)
The following table describes the contents of each manual.
Manual name
FUJITSU Storage
ETERNUS DX, ETERNUS AF
Configuration Guide
(Web GUI)
ETERNUS Web GUI
User's Guide (Settings)
ETERNUS Web GUI
User's Guide (Operation)
This manual describes the installation and the environmental settings for the ETERNUS DX/
AF storage systems. For basic settings that are not described in this manual, refer to the
following manuals.
•
"FUJITSU Storage ETERNUS DX60 S3 Disk Storage Systems Configuration Guide (Basic)"
•
"FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk Storage Systems
Configuration Guide (Basic)"
•
"FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk Storage Systems
Configuration Guide (Basic)"
•
"FUJITSU Storage ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)"
•
"FUJITSU Storage ETERNUS AF650 All-Flash Arrays Configuration Guide (Basic)"
•
"FUJITSU Storage ETERNUS DX200F All-Flash Arrays Configuration Guide (Basic)"
This manual describes the procedures, setup parameters, input conditions, and the default
values for ETERNUS Web GUI. Refer to this manual for functions and advanced settings that
are not described in "FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Web
GUI)".
This manual describes the monitoring information of the system status for the ETERNUS
DX/AF storage systems. This manual also describes how to check the results of the ETERNUS
Web GUI configuration.
6
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
Contents
P2X0-1260-19ENZ0