Appendix A Status List
A.5 Component Status
Drive status is displayed with an icon and the status name. The drive status is described below.
The drive is in the normal state.
The drive is used in the RAID group.
The drive is an unused hot spare.
The drive is not used (not registered as a RAID group or hot spare), or is waiting
for rebuild/copy back.
The drive is starting up.
Rebuild or copy back is being performed in the drive.
A Redundant copy is being performed in the drive.
The drive is not supported. [Example] Drive capacity is insufficient.
The drive cannot be recognized.
An error involving RAID group failure has occurred in the drive.
An error has occurred in the drive.
A status other than the ones listed above.
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED