Fcoe Port - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 5 Connectivity Status
5.3 CA Port Group
Filter setting
Filter
Port
Type
Status
Host Group
Port Group
SAS Address
5.3.4

FCoE Port

Parameters of the FCoE ports that are registered in the ETERNUS DX are displayed.
The ETERNUS DX60 S3, the ETERNUS AF250/AF650, and the ETERNUS DX200F do not support this function.
The following items are displayed in the Main area:
• Port
The location information (x: CE number, y: CM number, z: CA number, w: Port number) of the target port is
displayed.
- For the ETERNUS DX8700 S3/DX8900 S3
CE#x CM#y CA#z Port#w
- For the other models
CM#y CA#z Port#w
• Type
The CA type (fixed at "FCoE") of the target port is displayed.
Select the location information of the port that is to be displayed.
Select the type of the port that is to be displayed.
Select the status of the port that is to be displayed.
Input the name of the host group that has the host affinity setting with the port that is
to be displayed.
When not using the host group name for filtering, leave this item blank.
Input the name of the port group to which the port that is to be displayed belongs.
When not using the port group name for filtering, leave this item blank.
Input the SAS Address of the SAS host that has the host affinity setting with the port that
is to be displayed.
When not using the SAS address for filtering, leave this item blank.
265
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
Description
P2X0-1260-19ENZ0