Chapter 3 Component Status
The drive performance information is displayed.
Performance information is obtained when performance monitoring is operated from ETERNUS Web GUI,
ETERNUS CLI, or any other monitoring software. Refer to "Start/Stop Performance Monitoring" in "ETERNUS
Web GUI User's Guide (Settings)" for details on how to start performance monitoring with ETERNUS Web
The interval for acquiring performance information can be specified when starting the monitoring. When
using ETERNUS Web GUI, the default interval is 30 seconds.
The average performance values during the specified interval are displayed.
The following items are displayed in the Main area:
The enclosure where the drive is installed is displayed.
The slot number of the enclosure where the drive is installed is displayed.
The busy rate of the drive is displayed with a bar and a numerical number. When a drive is in the "
ken" or "
Minimum Busy Rate
Not Supported" state, a "-" (hyphen) is displayed.
Select the enclosure in which the target drive is installed.
Specify the slot number of the drive that is to be displayed.
When not using the slot number for filtering, leave this item blank.
Specify the minimum busy rate for the drive that is to be displayed.
The drives with a busy rate that exceeds the specified minimum busy rate are
When not using the minimum busy rate for filtering, leave this item blank.
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED