Fujitsu ETERNUS DX60 S3 User Manual page 326

Chapter 7 Thin Provisioning Pool Status
7.1 Thin Provisioning Pools
The following items are displayed in the Main area:
• No.
The TPP number is displayed. Click this item to display the screen shown in
Detail (Basic)" (page
• Name
The TPP name is displayed. Click this item to display the screen shown in
Detail (Basic)" (page
• Drive Type
The type of drive that is used to configure the TPP is displayed.
- Online
SAS disks
- Nearline
Nearline SAS disks
- SSD
SSDs (*1)
- Online SED
Online SEDs
- Nearline SED
Nearline SEDs
- SSD SED
SSD SEDs
*1: "SSD" is displayed regardless of the actual SSD type (SSD-M/SSD-L/SSD).
• RAID Level
The level of RAID group that configures the TPP is displayed.
- High Performance (RAID1+0)
- High Capacity (RAID5)
- High Reliability (RAID6)
- High Reliability (RAID6-FR)
- Mirroring (RAID1)
- Striping (RAID0)
• Status
The TPP status is displayed. Refer to
of TPP status.
• Used Status
The usage of TPP is displayed.
- Normal
TPP usage does not exceed the "Attention" threshold.
- Attention
TPP usage exceeds the "Attention" threshold but does not exceed the "Warning" threshold.
- Warning
TPP usage exceeds the "Warning" threshold.
328).
328).
"A.4 Thin Provisioning Pool Status" (page 409)
326
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
"7.1.2 Thin Provisioning Pool
"7.1.2 Thin Provisioning Pool
for detailed information
P2X0-1260-19ENZ0