Chapter 6 RAID Group Status
6.6 RAID Group Detail (Volume Layout)
RAID Group Detail (Volume Layout)
Detailed information of the volume layout is displayed. Note that the [Volume Layout] tab is not displayed for
RAID groups that are registered as EXCPs.
The following items are displayed in the Main area:
The first Logical Block Address (LBA) of the volume is displayed.
The volume capacity is displayed.
If the volume capacity exceeds 1023.99MB, the capacity is displayed in units of "GB". If the volume capacity
exceeds 1023.99GB, the capacity is displayed in units of "TB". The capacity is rounded off to two decimal
places. To check the volume capacity in units of "MB", use ETERNUS CLI.
The volume number is displayed. Unused space is displayed as "Free".
The volume name is displayed.
The volume status is displayed. Refer to
The volume type is displayed.
"A.2 Volume Status" (page 406)
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
for detailed information of volume