Host Group - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 5 Connectivity Status

5.2 Host Group

5.2 Host Group
The list of the host groups is displayed.
A host group uses the same interface type, and groups the hosts (HBAs), which access the same LUN group.
The following items are displayed in the Main area:
• Name
The host group name is displayed.
By clicking this item, the [Host Group Detail] screen is displayed. Refer to
Detail" (page 280)
• Type
The interface type of the host registered in the host group is displayed.
• Status
Whether the host group is used ("Active") or not ("Inactive") for the host affinity settings is displayed.
"Host affinity setting" is to specify association between "Host Group", "CA Port Group", and "LUN Group".
- Active
The host group is used for the host affinity settings. The LUN group can be accessed from the member
host of the host group.
- Inactive
The host group is not used for the host affinity settings.
• Host Response
The host response name that has been assigned to a host group is displayed.
• Number of Hosts
The number of hosts that have been registered in the host group is displayed.
for display items.
247
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
"5.7.2 LUN Group : LU QoS Group
P2X0-1260-19ENZ0