Fujitsu ETERNUS DX60 S3 User Manual page 187

Chapter 3 Component Status
3.24 Port Detail
- Link Status
The link status of the port is displayed.
If the status is "
• Link Down
• 10Gbit/s Link Up
- WWN
The WWN of the port is displayed.
- Affinity Mode
The affinity mode of the port is displayed.
• ON
• OFF
- FC Frame Size
The frame size of the port is displayed.
• 512 byte
• 1024 byte
• 2048 byte
- VLAN ID
The VLAN ID is displayed.
When the VLAN ID is manually specified, the VLAN ID is displayed between 0 - 4095.
When the VLAN ID is automatically specified, "Automatic" is displayed.
- Fabric Name
The fabric name (WWN for FCoE) is displayed.
When the fabric name is manually specified, the specified fabric name is displayed.
When the fabric name is automatically specified, "Automatic" is displayed.
- MAC Address
The MAC address of the port is displayed.
- Part Number
The part number of the port is displayed.
If the part number cannot be acquired, a "-" (hyphen) is displayed.
- Serial Number
The serial number of the port is displayed.
If the serial number cannot be acquired, a "-" (hyphen) is displayed.
- Hardware Revision
The hardware version of the port is displayed.
If the hardware version cannot be acquired, a "-" (hyphen) is displayed.
- SFP Type
The SFP type of the port is displayed. If the SFP is not installed, "Unmount" is displayed.
• SFP+
• SFP+ Copper
• Unknown
The temperature, voltage, current, transmission power, and received power for the SFP in the port are dis-
played. Refer to
Unknown", a "-" (hyphen) is displayed.
"FC port" (page 174) for display items.
187
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0