Volume (Basic Information) - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 4 Volume Status

4.1 Volume (Basic Information)

4.1 Volume (Basic Information)
This function displays the basic information of volumes.
The display process for the volume list may be delayed for a maximum of two minutes while a meta cache
redistribution is being performed for NAS volumes (NAS user volumes or NAS backup volumes).
The following items are displayed in the Main area:
• No.
The volume number is displayed.
During volume creation, the volume number can be allocated automatically or specified manually. When
the volume number is allocated automatically, the volume number is allocated from the smallest unused
decimal number in ascending order.
Click this item to display the [Volume Detail] screen. Refer to
display items.
• Name
The volume name is displayed. Click this item to display the [Volume Detail] screen. Refer to
Detail (Basic)" (page 223)
• Status
The volume status is displayed. When the volume status is normal, "
"A.2 Volume Status" (page 406)
• Type
The volume type is displayed.
- Standard
Standard volumes are the most commonly used volumes that are created in RAID groups.
A standard volume is used for normal usage, such as file systems and databases. The server recognizes
it as a single logical unit.
- WSV
WSV is a volume that is created by concatenating distributed areas in from 2 to 64 RAID groups.
Processing speed is fast because data access is distributed.
for display items.
for detailed information of volume status.
194
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
"4.11 Volume Detail (Basic)" (page 223)
Available" is displayed. Refer to
for
"4.11 Volume
P2X0-1260-19ENZ0