Fujitsu ETERNUS DX60 S3 User Manual page 27

Chapter 1 Screen Operations
1.1 Overview
• Battery
The battery charge level is displayed.
When the battery charge level is 90% or more, "Full Charge" is displayed. When the battery charge level is
less than 90%, "xx%" is displayed.
For the ETERNUS DX8700 S3/DX8900 S3, the lowest battery charge level among all CEs is displayed. Click
this item to display the [Controller Enclosure] screen. Refer to
details.
This item is displayed for the ETERNUS DX500 S3/DX600 S3, the ETERNUS DX8100 S3/DX8700 S3/DX8900
S3, and the ETERNUS AF650.
• Remote Support
The Remote Support status (REMCS or AIS Connect) is displayed.
- Operating
The Remote Support is operating.
- Maintenance in Progress
The ETERNUS DX/AF is under maintenance and the Remote Support is temporarily stopped.
After the maintenance is complete, Remote Support is automatically resumed.
- Stopped
The Remote Support has been stopped.
- "-"
The Remote Support setting is not performed.
• Connecting Module
The Controller Module (CM) to which ETERNUS Web GUI is connected is displayed.
■
RAID Groups
The usage of RAID groups is displayed.
• Pie chart
The pie chart indicates the total used capacity and the total free capacity in the RAID groups.
Blue: Total used capacity
Gray: Total free capacity
• RAID Group Count
The number of RAID groups registered in the ETERNUS DX/AF is displayed.
The "RAID Group Count" includes the number of RAID groups that configure TPPs, the number of RAID
groups that configure FTRPs, the number of RAID groups that are registered as REC Disk Buffers, and the
number of RAID groups that are registered as Extreme Cache Pools (EXCPs).
• Volume Count
The number of volumes registered in the ETERNUS DX/AF is displayed.
The "Volume Count" displays the number of "Standard" type volumes and "Wide Striping Volumes (WSV)".
• Total Used Capacity
The total used capacity of the RAID groups [TB/GB/MB] is displayed. The "Total Used Capacity" is the total
capacity of all of the RAID groups that are used. An example of this capacity is space that is used for vol-
umes in the RAID groups. The "Total Used Capacity" includes the capacity of the RAID groups that configure
TPPs, the capacity of the RAID groups that configure FTRPs, the capacity of the RAID groups that are
registered as REC Disk Buffers, and the capacity of the RAID groups that are registered as EXCPs.
• Total Free Capacity
The total free capacity of the RAID groups [TB/GB/MB] is displayed. The "Total Free Capacity" is a total of
unused capacities in the RAID groups. The "Total Free Capacity" includes the capacity of the RAID groups
that configure TPPs, the capacity of the RAID groups that configure FTRPs, the capacity of the RAID groups
that are registered as REC Disk Buffers, and the capacity of the RAID groups that are registered as EXCPs.
27
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
"3.2 Controller Enclosure" (page 81)
P2X0-1260-19ENZ0
for