Fujitsu ETERNUS DX60 S3 User Manual page 88

Chapter 3 Component Status
3.2 Controller Enclosure
- For the ETERNUS DX500 S3/DX600 S3
• FC 2port
• FC 4port
• 10G-iSCSI 2port
• 1G-iSCSI 2port
• 1G-iSCSI-RA 2port
• 10G-FCoE 2port
• 10G-NAS 2port
• 1G-NAS 4port
- For the ETERNUS DX8100 S3/DX8700 S3/DX8900 S3
• FC 2port
• FC 4port
• 10G-iSCSI 2port
• 1G-iSCSI 2port
• 1G-iSCSI-RA 2port
• 10G-FCoE 2port
- For the ETERNUS AF250
• FC 2port
• 10G-iSCSI 2port
• 10G Base-T iSCSI 2port
- For the ETERNUS AF650
• FC 2port
• FC 4port
• 10G-iSCSI 2port
- For the ETERNUS DX200F
• FC 2port
• 10G-iSCSI 2port
Note that a 1-port type CA for the ETERNUS DX60 S3/DX100 S3 is displayed as "2port" (for FC, "FC 2port"
is displayed). Similarly, a 2-port type CA (1G-NAS) is displayed as "1G-NAS 4port". Available ports can
be checked in the [Internal Parts] tab of the [Channel Adapter Detail] screen. The [Add Channel
Adapter Port] function is displayed in the action field only when a 1-port type CA or a 2-port type CA is
installed in the ETERNUS DX. Refer to
port type CAs and 2-port type CAs are not available in some regions.
• Status
The CA status is displayed. Refer to
"3.8 Channel Adapter Detail" (page 132)
"A.5 Component Status" (page 410)
88
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
for details. Note that 1-
for details.
P2X0-1260-19ENZ0