Lu Qos Group - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 5 Connectivity Status
5.7 Host-LU QoS
• Performance Monitoring
Refer to "Performance Monitoring" (page 285)
• IOPS
Refer to "Performance Monitoring" (page 285)
• Throughput
Refer to "Performance Monitoring" (page 285)
• Delay Time
Refer to "Performance Monitoring" (page 285)
5.7.12

LU QoS Group

A list of the registered LU QoS groups is displayed.
An LU QoS group is a group of the bandwidth limit (the maximum performance) configured for each Host
LUN.
By assigning a LU QoS group to a LUN group with the host affinity setting, the bandwidth limit can be
configured for each LUN. Refer to "Set Host-LU QoS" in "ETERNUS Web GUI User's Guide (Settings)" for details.
The following items are displayed in the Main area:
• LU QoS Group No.
The LU QoS group number is displayed between 0 and 1055.
• Status
Whether a LU QoS group is assigned to a LUN group with the host affinity setting is displayed.
"Host affinity setting" is to specify association between "Host", "CA Port" and "LUN Group".
- Active
The LU QoS group is assigned to a LUN group.
- Inactive
The LU QoS group is not assigned to a LUN group.
for details.
for details.
for details.
for details.
290
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0