Fujitsu ETERNUS DX60 S3 User Manual page 114

Chapter 3 Component Status
3.5 Drives
• Usage
The usage of the drive is displayed.
- For a drive that is used for user data or an unused drive
Data
- For a drive that is registered as a Global Hot Spare
Global Hot Spare
- For a drive that is registered as a Dedicated Hot Spare
Dedicated Hot Spare
• RAID Group
When the drive belongs to a RAID group, the RAID group number and the RAID group name are displayed.
However, if the drive usage is "Dedicated Hot Spare", the RAID group number and the RAID group name are
displayed even when the drive is not used as a Hot Spare. Click this item to display the [RAID Group Detail]
screen.
When the usage is not "Dedicated Hot Spare" and the drive is not registered in a RAID group, a "-" (hyphen)
is displayed.
• Health
The drive lifetime information is displayed between 0% - 100%. As the lifetime of the drive is reduced, the
health level of the drive is decreased.
A "-" (hyphen) is displayed in the following conditions:
- The drive is neither "SSD" nor "SSD SED"
- The lifetime information cannot be obtained
Filter setting
Enclosure
Slot No.
Status
Capacity
Type
Usage
Filter
Select the enclosure in which the target drive is installed.
Specify the slot number of the drive that is to be displayed.
When not using the slot number for filtering, leave this item blank.
Select the drive status that is to be displayed.
Specify the capacity of the drive that is to be displayed.
When not using the drive capacity for filtering, specify "0".
Select the drive type that is to be displayed.
Select the usage of the drive that is to be displayed.
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
Description
114
P2X0-1260-19ENZ0