Fujitsu ETERNUS DX60 S3 User Manual page 388

Chapter 8 Advanced Copy Status
8.7 Settings (Advanced Copy)
The following items are displayed in the Main area:
• Group
The management group number of the REC Buffer is displayed.
- ETERNUS DX100 S3
0
- ETERNUS DX200 S3
0 - 3
- ETERNUS DX500 S3/DX600 S3
0 - 7
- ETERNUS DX8100 S3/DX8700 S3/DX8900 S3
0 - 7
- ETERNUS AF250
0 - 3
- ETERNUS AF650
0 - 7
- ETERNUS DX200F
0 - 3
• Usage
The REC Buffer usage is displayed.
- Unused
- Send
- Receive
• Remote Box ID
The Box ID for the remote storage system is displayed.
If the copy path information is deleted after the REC Buffer creation, "???" is displayed. Note that REC Buf-
fers with "???" cannot be used. Delete any REC Buffers with this status. Refer to "Modify REC Buffer" in
"ETERNUS Web GUI User's Guide (Settings)" for details.
A "-" (hyphen) is displayed when the usage is "Unused".
• Status
The REC Buffer status is displayed.
- ACTIVE
REC Buffer can transfer data.
- INACTIVE
REC Buffer cannot transfer data.
• Mirror Status
The mirroring status (redundancy status) of the REC Buffer is displayed. When the REC Buffer usage is
"Unused", a "-" (hyphen) is displayed. The REC Buffer is duplicated by two CMs to prevent data loss when
the ETERNUS DX/AF fails or when maintenance is performed.
- Normal
Duplication of the REC Buffer was successful.
- Recovering
Duplication of the REC Buffer failed.
388
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0